Setting and Changing Parameters
Various functions of the product can be selected by changing parameter settings.
■ Parameter Setting Overview
Example: Display and change the "F5" parameter (Audible alarm enable/disable).
(This example will show to change the audible alarm from the factory default setting of "1" to "0".)
1 . While holding down the ▲
switch, press the ▼ switch.
2 . While holding down the ▲
switch or, press the ▼ switch,
and "F5" will be displayed.
3 . Press and hold the "SET"
switch for 5 seconds.
4.Press the ▲ or ▼ switch so
that "1" changes to "0".
5.Press the "SET" switch.
6.Press the "RESET" switch.
※ Other parameters settings can be changed by selecting the appropriate parameter as in step 2. above,
and then continuing with steps from 3.
IMPORTANT
● If parameter "F99" (setting lock) is set to "1" then other parameters cannot be changed.
Change "F99" to "0" before changing other parameters.
Parameters
Setting and Changing Parameters
→
↓
→
↓
→
↓
→
↓
→
↓
→
Doing so switches to the parameter display mode.
< Shown on the display panel >
Display alternates between "F1" and the set value of F1.
< Shown on the display panel >
Display alternates between "F5" and the set value of 1.
< Shown on the display panel >
"1" will be continuously displayed.
< Shown on the display panel >
"0" will be continuously displayed.
The new setting will be locked on.
< Shown on the display panel >
Display alternates between "F5" and the set value of 0.
< Shown on the display panel >
The display will return to show the measured
temperature.
17