Orion RKS250F-S Operation Manual page 33

IMPORTANT
● If one of the built-in safety devices activates, press the RESET switch, conduct the
appropriate measures as noted above, and then restart operation. (Please wait 3 minutes after
the product stops before starting the product again.)
● Please consult with your dealer if a problem cannot be resolved by following the above
mentioned measures.
● If the power source is cut off less than 2 seconds after the remote operation switch is turned
OFF, E14 will be displayed. Therefore, please wait at least 2 seconds after turning OFF
(shorting) the remote operation switch before cutting off power to the product.
● Errors that occurred previously can be reviewed. (See page 16 for details.)
● See page 24 for information on how to clear the "
Troubleshooting
30
" warning.