Dosing; Hose Selection; Hose Materials From Factory; Available Hose Materials From Getinge Sales Companies - Getinge WD15 CLARO Installation Manual

4 DOSING

4.1 Hose selection

4.1.1 Hose materials from factory

4.1.2 Available hose materials from Getinge sales companies

INSTALLATION MANUAL GETINGE WD15 CLARO
The machines are supplied with the following hose material for the
different pumps:
Dosage No. Transport hoses
Dosing 1 503645300, Tygon 502992000,
Dosing 2 503645300, Tygon 502992001,
Dosing 3 503645300, Tygon 502992000,
Dosing 4 503645300, Tygon 502992000,
The hoses in the hose pumps are exposed both to chemical wear
and mechanical wear. It is therefore important that the correct hose
material is selected with regard to the chosen detergent to achieve
safe operation and satisfactory service life. The hoses in the hose
pumps are consumable parts with an anticipated service life of 1
year. Replace the hoses as recommended in the tables below,
depending on the detergents to be used.
Note!
Calibration must always be done after a pump hose
replacement. See "Technical Manual."
The following types of hoses are available from Getinge sales
companies:
Article number Pump hose
502992000 Norprene
502992001 Silicone
502992003 Fluran
502992004 Tygon
4 DOSING
Pump hose
Norprene
Silicone
Norprene
Norprene
Design
Black with white
text
Transparent, matt
Black
Transparent,
yellow
33 (48)