Chapter 4 Operation; How To Load The Sheet Media Into The Auto Feeder - GCC Technologies AFJ-24S User Manual

Chapter 4 Operation

4.1 How To Load The Sheet Media Into The Auto Feeder

Step 1 Place the sheet media flat on the stack of the feeder and adjust the pinch roller to proper position
according the media size.
NOTE :
1. Make sure the sheet media is flat to avoid any fail to load into machine for the curved media
2. A laminated media is requested while using in the auto feeder. Otherwise, it may probably fail
to be adsorbed by suction cup due to the air leaking.
Step 2 Put the L-type media blocks to touch the rear edge of the sheet media.
AFJ-24S User Manual
69