Steelcase Verb Active Manual page 22

®
Installing Monitor Mounting Components for 43" Tables
(Continued)
WARNING
RISK OF SHOCK TO USER, OR FIRE
•
Make sure that the cable is routed through the two (2)
cable clips that were installed onto the inside of the
hanger side panel.
•
Make sure the articulating wire manager is installed
and used to contain moving wires to prevent wire
pulling or pinching.
x1
.750"
(19.1 mm)
4a
x1
ARTICULATING
WIRE MANAGER
0.472"
(12.0 mm)
mechanism to open lift automatically.
NOTE: Using the up/down switch, extend the lift
column to full height to ease installation of monitor.
MONITOR SUPPORT
ASSEMBLY
4b
M6
NOTICE:
Plastic cover must be installed for lift
2
x2
0.630"
(16.0 mm)
M6
3
CABLE
CLIPS
22 of 78
P/N 1094808001
Doc # 94775 Rev F