Advertisement
Available languages
Available languages
®
34" Table, Cabinet Top Support Plate and
Monitor to Lift Column Installation
WARNING
RISK OF SHOCK TO USER, OR FIRE
•
Make sure that the cable is routed through the two (2)
cable clips that were installed onto the inside of the
hanger side panel.
•
Make sure the articulating wire manager is installed
and used to contain moving wires to prevent wire
pulling or pinching.
ARTICULATING
WIRE MANAGER
x1
.750"
(19.1 mm)
3a
mechanism to open lift automatically.
NOTE: Using the up/down switch, extend the lift column
to full height to ease installation of monitor.
MONITOR
HANGER
2
CABLE
CLIPS
NOTE: Assembly shown on this page is for
34" table monitors. To install monitor for 43"
tables, see page 16.
3b
x1
0.472"
(12.0 mm)
NOTICE:
Plastic cover must be installed for lift
1
M6
M6
x2
0.630"
(16.0 mm)
19 of 78
P/N 1094808001
Doc # 94775 Rev F
Advertisement
