Advertisement
1.
A
Extended 3-Way Junction
Insert the modular screws in the extended 3-way junction (A) into the keyholes in the
curved panel (C), making sure that all of the screws have engaged into the keyholes.
3.
Repeat steps 1 and 2 (above) to attach the extended 3-way junction (A) to the curved
panel (B) on the opposite side of the assembly.
Make sure to tap the top of the extended 3-way junction (A) with a cushioned mallet
to fully engage & tie the extended 3-way junction (A) to the curved panel (B) using a
bottom connector link (Z) (see step 2 for method).
DEN.Curve Assembly Instructions
C
Curved Panel (RH)
B
Curved Panel (LH)
2.
Junction
4.
Attach the 850w side panel (D) into the keyholes in the extended 3-way junction (A),
making sure that all of the screws have engaged into the keyholes.
Z
Bottom Connector Link
Panel
Connector
M8 nut
Leveller
D
850w Side Panel
DWG No: SASS-0033
Revision: B (27/10/15)
Drawn by: JB
Drawn date: 05/12/14
Advertisement
