Starting Up The Generator - GENMAX GM1200i User Manual

1.
Remove the load from all output ends;
2.
Turn ventilation knob of fuel tank cap to "ON";
3.
Turn fuel switch to "ON" position;
4.
Press ECO switch to "OFF";
5.
Press ENG switch to "ON";
6.
Move lever to "START" position;
Tip: When hot engine is started up, it is unnecessary to close the choke
valve.
7.
First gently pull startup handle, until guy cable is hooked tight, and then pull
it with effort;
Tip: When pulling the hand starter, hold generator carrying handle firm, to
prevent the generator from overturning.

STARTING UP THE GENERATOR

11