Page 1
GM9000iED Cancellation of Bonded Neutral Grounding Instructions 2022.7.8...
Page 2
Disassemble and operate as the following Remove the 10 bolts in the picture with an Use a wrench to 8mm socket 2.检查触发器插接头 unscrew the two bolts 有无松脱。 and nuts, and remove the handle...
Page 3
Unscrew these 9 screws with a Phillips screwdriver or electric gun and pull the panel out some distance Pull the front cover from here by hand...
Page 4
View and operate from this Locate the bolts that hold the direction after pulling out the find the terminal white wire on the terminal block panel block and use a wrench to unscrew the...
Page 5
Remove the white Wrap the removed white wire terminal with wire terminal insulating tape, and then restore the unit to complete the operation of canceling the neutral grounding。...
Need help?
Do you have a question about the GM9000iED and is the answer not in the manual?
Questions and answers