Table of Contents
Advertisement
5.
Install the spark plugs in reverse order of removal.
Spark cold torque: 12.5 N.m
Tip: If there is no torque wrench when installing the spark plug, a better estimation method is to screw it 1/4-1/2
turns by force after screwing it in place, but the spark plug shall be screwed to specified torque as soon as
possible.
2
Adjustment of the carburetor
The carburetor is an important components of the engine. The adjustment shall be carried out by a dealer
with professional knowledge, professional data and equipment, to ensure that the adjustment is proper.
3
Replacement of oil
WARNING
Do not drain the oil immediately after turning off the generator. Oil temperature is very high, when
operating, take care to avoid scalding.
1.
Put the generator on a horizontal surface, start the generator, run it for a few minutes to increase its
temperature, and then turn off the engine;
2.
Turn the knob to "ON" and remove the oil maintenance cover.
3.
Unscrew oil dipstick.
SERVICE AND MAINTENANCE
17
Advertisement
Table of Contents
