Two Car Operation - Clarion UNGO MS3001 Installation Manual

Two Car Operation

For your convenience, you may use a single transmitter to operate multiple vehicles. The
Transmitter can be set to arm Car #1 with Button 1 and arm additional cars with the first available
Buttons not being used by Car #1.
The following diagram illustrates how a single transmitter can operate a two-car system.
As stated, the Programming and set-up functions of Car #2's system will not be affected by this
Transmitter configuration and will operate exactly as described in this manual.
The following diagram describes how it is possible to control a primary vehicle and a secondary
vehicle using a single Transmitter.
BUTTON 1
BUTTON 2
MODE BUTTON
Page 12 - MS3001 / MS3200 Installation Manual
MODE
none
ARM
AUX 1
(A) = Car 1
(B) = Car 2
MODE
green
ARM
(A) (B)
(A)
Mode Sequence