Table of Contents
Advertisement
4. SECURITY SYSTEM OPERATION
4.1 Arming Operation
To arm the alarm system, press Lock button on the transmitter:
• The siren will chirp once.
• The parking lights will flash once.*
• The doors will lock.*
• The LED will come on solid for 5 seconds, and then begin to flash. After 10
seconds the alarm system is armed.
* Optional feature
4.2 Remote Sensor Bypass
To arm the system and bypass the shock sensor, hood/trunk inputs, press the Lock
button to Arm, then within 2 seconds press the Lock button again. The siren will
chirp 5 times to indicate Sensor Bypass mode. The doors will still be monitored.
4.3 Passive Arming (Programmable feature)
The passive arming feature allows the system to arm automatically. The remote
transmitter still can be used to arm the system at any time. This option is user
programmable (see User Accessible Programming Options).
To arm the alarm system passively:
1. Turn the ignition Off.
2. Exit the vehicle and close all the doors.
• The LED will begin flashing rapidly to indicate the system is preparing to arm.
• The siren will chirp 30 seconds after the last door is closed to indicate the
system is armed.
• The doors will lock.*
* Optional feature
4.4 Disarming Operation
To disarm the system press the Unlock button on the transmitter:
• The siren will chirp twice.**
• The parking lights will flash twice.*
• The doors will unlock.*
• The dome light will turn on for 30 seconds.*
* Optional feature
** If the alarm was triggered while away, the system will respond with 3 chirps
and 3 parking light flashes, see Tamper Alert.
6
Advertisement
Table of Contents
