Two Car Operation - Clarion UNGO MS5500 Owner's Manual

Button 2 Disarms the system and at the same time activates Auxiliary Function 1 (which unlocks
the driver's door). This Button also unlocks the doors when the system is in Valet Mode.
If the system is Armed, pressing Button 2 will Disarm the system and unlock the driver's door only.
If the system is Disarmed, pressing Button 2 within 10 seconds after disarming will unlock all remaining doors.
If the system is in Valet and the doors are locked, pressing Button 2 will unlock the driver's door. Pressing Button
2 again within 10 seconds after disarming will unlock all remaining doors.
The following diagram illustrates how the Remote Transmitter controls the functions of the
system when used in the Driver Door Priority Mode:
BUTTON 1
BUTTON 2
MODE BUTTON
*Extra parts and/or labor may be required to properly utilize this mode. See your Authorized Ungo Dealer for details.

Two Car Operation

If you want to control two or more Ungo Security systems by a single Remote Transmitter, the
unused functions of the Remote Transmitter can be set up by your dealer to operate another
Ungo Security system, giving you the convenience of operating multiple vehicles from a single
Remote Transmitter.
When set for two car operation, the Remote Transmitters will function as in the example below:
BUTTON 1
BUTTON 2
MODE BUTTON
For more information about Two Car operation, see your Authorized Ungo Dealer.
Page 4 - MS5500 Owner's Manual
MODE
none
ARM
DISARM*/ UNLOCK ALL
*Disarming the system will unlock only the driver's door.
MODE
none
ARM
AUX 1
(A) = Car 1
(B) = Car 2
MODE
green
AUX 2
not used
MODE MODE
green orange
AUX 2
ARM
(A) (A)
AUX 1
not used
(A)
Mode Sequence
None:Green:Orange:Red:None:...
MODE
MODE
orange
not used
not used
not used
not used
Mode Sequence
None:Green:Orange:Red:None:...
MODE
red
AUX 2
(B) (B)
not used
(B)
red