Optional Dlrm - Door Lock Relay Module - Clarion UNGO MS3001 Installation Manual

Optional DLRM - Door Lock Relay Module

The optional DLRM is a factory door lock integration module with built-in relays for use with high
current positive trigger door locking systems (like those found on some older GM models) and
voltage reversal door locking systems (also known as 5-wire systems, found on many Ford
vehicles and some GM models). The DLRM can also be used with aftermarket actuators for
vehicles not equipped with power door locks. Some late model Chrysler, Ford, and Mazda
vehicles use lower voltage systems requiring the use of resistors. For details on integration with
these systems, please call the Ungo dealer technical support hotline.
DLRM Wiring Description:
5-pin Harness
White Lock #87a
Green Lock #30
Blue Unlock #30
Brown Unlock 87a
Violet Lock & Unlock #87
Installation:
Connect the small Green wire from the DLRM to the White/green wire (pin 9) from the alarm.
Connect the small Blue wire from the DLRM to the White/blue wire (pin 10) from the alarm.
Connect the small Red wire to Red wire (pin 2) from the alarm.
Page 20 - MS3001 / MS3200 Installation Manual
normally closed
common
normally closed
common
normally open
3-pin Harness
Green Lock (-) trigger
Red +12V input
Blue Unlock (-) trigger
DLRM Wiring Diagrams
Blue
Red
10A
White/blue
7A
See
Green
Black Chassis Ground
Red +12v
White/green