Otto Bock 476L52 Series Instructions For Use Manual page 33

9 Disposal
9.1 Disposal information
Return the product to the qualified personnel for disposal.
All components of the product must be disposed of properly in accordance
with the respective national environmental regulations.
9.2 Information on re-use
The product is suitable for re-use.
Products that are being re-used are subject to increased strain. Features
and performance must not change in a way that could impair the safety of
users or third parties during the period of use.
The relevant product must be thoroughly cleaned and disinfected before re-
use. Then have the product inspected by qualified personnel with respect to
its condition, wear and tear, and damage. All worn and damaged compon­
ents as well as components that do not fit or are unsuitable for the user must
be replaced.
10 Legal information
All legal conditions are subject to the respective national laws of the country
of use and may vary accordingly.
10.1 Liability
The manufacturer will only assume liability if the product is used in accord­
ance with the descriptions and instructions provided in this document. The
manufacturer will not assume liability for damage caused by disregarding the
information in this document, particularly due to improper use or unauthor­
ised modification of the product.
10.2 Warranty
Further information regarding the warranty terms and conditions may be
obtained from the qualified personnel who fitted this product, or from the
manufacturer's customer service department (see inside back cover of the
instructions for use for addresses).
10.3 Service life
Expected lifetime: 5 years
The design, manufacturing and requirements for the intended use of the
product are based on the expected lifetime. These also include the require­
ments for maintenance, ensuring effectiveness and the safety of the product.
33