Otto Bock 476L52 Series Instructions For Use Manual page 32

7.3 Care
CAUTION
Lack of or improper cleaning
Health hazard due to infections, damage to the product due to user error
► Clean the product at regular intervals.
► Do not clean the product with a jet of water or a pressure washer. The
penetration of water can cause corrosion and subsequent malfunc­
tions.
7.3.1 Cleaning
Clean the product regularly depending on the degree of soiling and fre­
quency of use, at least 1x per month:
• Use warm soapy water for cleaning. Add some disinfectant if needed.
Carefully dab the product with a damp cloth or sponge and wipe with a
dry, clean cloth.
• Do not use any aggressive cleaners, solvents or hard brushes etc.
• Allow the product to fully air dry before use.
• Do not expose the product to direct heat (e.g. sunshine, stove or radiator
heat, hair dryer).
7.3.2 Disinfection
• Thoroughly clean the product before disinfecting.
• Wipe all parts of the product with a disinfectant.
• Only use colourless water-based disinfectants. Observe the instructions
for use provided by the manufacturer.
8 Maintenance and repair
The function of the product should be checked before each use.
•
Check the product monthly for wear and damage.
•
Check screw connections monthly for tightness.
•
• Especially during the initial period of use or after making adjustments,
screw connections must be checked for tightness more often. If a screw
connection loosens repeatedly, contact the qualified personnel promptly.
• The user is not permitted to make repairs to the product.
• Have damaged or worn parts replaced by qualified personnel as soon as
possible.
• Servicing and repairs may only be carried out by qualified personnel or
the manufacturer. This will ensure that only Ottobock spare parts are
used for repairs.
32