Advertisement
Also one or more wash program indicators are lit.
'F' Fault Codes
If the wash modifier and the lock indicators are flashing, it is an 'F' fault.
Also one or more wash program indicators are lit.
Double models only:
There may be a fault in one or both of the drawers.
Note down which indicators are flashing or lit in each drawer. These may be different if the faults are different in each
drawer.
If a fault occurs in only one drawer you are still able to use the other drawer.
'F' Fault Codes
If an F fault code is indicated, you may be able to clear the fault by re-setting the dishwasher - see the steps below. If
the fault persists, note down the code before
disconnecting the dishwasher from the water and power supplies, and contact Customer Care.
To attempt to clear the fault code
1. Press ► to stop the beeping. Press ► again to turn the dishwasher off.
2. Wait a few seconds. Press ► again to turn the dishwasher back on.
If the flashing indicators have disappeared then the fault has been reset and you can continue to use your dishwasher.
https://producthelp.fisherpaykel.com/us/Clean/DishDrawer%E2%84%A2/Integrated_Single/DD24SI9/User_Guide_DD24SI9/0...
Updated: Thu, 02 Dec 2021 06:06:39 GMT
Powered by
5
Advertisement
