Inverted Wall Mounting Installation - Fisher & Paykel DE4560M Installation Instructions Manual

to ensure the ducting is not restricted with tight bends or can be
crushed.
Internal Venting
Front venting is the only recommended option for venting into the
room. The dryer is set up for front venting when it leaves the factory.
Where possible all efforts should be made to
vent the dryer externally to avoid moisture
build up around the dryer.

Inverted Wall Mounting Installation

Your dryer has been designed to be inverted and mounted on the wall above a washer or tub. A wall mounting kit must
be used. Inverting allows access to the dryer control panel.
Tools and parts required:
• Drill and 3mm bit
• Cross-head screwdriver.
Wall mounting kit includes:
• 2 x Plastic spacers
• 2 x Wall hanging brackets
• 2 x Hanging hook
• 4 x Wood screws
• 6 x Screws for hanging hooks and plastic spacers.
https://producthelp.fisherpaykel.com/au/Dry/Dryers/Vented/DE4560M1/User_Guide_DE4560M1/03_Installation_Instructions
External venting with kit part number
PD-F0408
Updated: Thu, 27 Jan 2022 05:02:50 GMT
Powered by
5