Firmeware Updates - Hall Technologies EMCEE200 User Manual

Firmeware Updates

Firmware updates may be made available to add features or to improve performance. These updates
will be available on the product page of the website:
https://halltechav.com/product/emcee200/
The firmware update process is as follows:
1. Download the file or files from the website.
2. Transfer the file(s) to a USB flash drive, formatted FAT32. Place all the file(s) in the ROOT
directory of the drive.
3. Remove power from the EMCEE200. Plug the flash drive into the USB-B port on the front of the
EMCEE200, and then re-apply power.
4. Wait for the update process to take place. Depending on the number of firmware files being
replaced, this may take several minutes. During this time, the LEDs on the front panel may
flash.
5. The EMCEE200 will automatically reboot after the update is complete. After rebooting, the
USB drive may be removed.
6. Firmware version can be checked via OSD, Web GUI, or RS-232/telnet.
© Copyright 2021 Hall Technologies, LLC
EMCEE200
33