Safety And Certification - Hall Technologies EMCEE200 User Manual

Presentation switcher

Table of Contents

EMCEE200

Safety and Certification

1. Please read and follow all instructions prior to use.

2. Do not use this product near water. Do not expose to rain or moisture.

Clean only with a dry cloth.

3. Do not block ventilation openings, or operate in extreme environments. Follow product

specifications for storage and operation temperatures.

4. Do not open or modify this product. There are no user serviceable parts inside. Opening the

product without written authorization from Hall Technologies will void the warranty.

5. Do not modify the power supply, or defeat the safety features of polarized "two-prong" or

grounding-type "three-prong" plugs. Polarized plugs have two blades, one wider than the other.

Grounding plugs have an additional third grounding prong. These features are provided for your

safety. If your outlet is not compatible with the provided plug, please consult a licensed electrician

to replace the outlet.

6. Do not use power cords, cables, or accessories that are visibly damaged, pinched, flattened

kinked, or frayed. Keep all cables and accessories free from walkways, doorways, or other areas

that may cause damage or present a tripping hazard.

7. Use only power supplies and accessories specified by Hall Technologies. Refer all servicing to

qualified service personnel.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference even if it causes undesired operation.

This equipment has been desinged to comply with the limits for a Class A digital device, pursuant to Part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment. This equipment generates,

uses, and can radiate radio frequency energy, and if it is not installed and used in accordance with the

instruction manual, it may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference, in which case the user will be

FCC Notice

Table of Contents