Table of Contents
Advertisement
EMCEE200
Audio Amplifier Output Card Installation (EXP-AMP-4860)
The EMCEE200 can be outfitted with a 40W stereo audio amplifier expansion card for local audio
amplification. The audio amplifier supplies 20W per channel at 4 or 8 ohms, in either stereo or
combined mono output.
ALWAYS remove power from the EMCEE200 before installing or removing expansion cards. Failure
to do so may result in damage to the unit and presents a risk of electric shock.
• Remove the faceplate from EXPANSION 1 or EXPANSION 2.
• Carefully slide the audio amplifier expansion card into the slot. Press firmly to engage with the
card-edge connector.
• Secure the expansion card by tightening the faceplate screws.
Only ONE audio amplifier expansion card may be installed
in the EMCEE200. If more audio amplification is needed,
an external audio amplifier will be
required. Contact Hall Technologies for
more information regarding available
audio amplifier solutions.
14
© Copyright 2021 Hall Technologies, LLC
Advertisement
Table of Contents
