Ir Remote Control - Hall Technologies EMCEE200 User Manual

IR Remote Control

EMCEE200 comes with an intuitive IR remote control to quickly change settings during a presentation.
If the EMCEE200 is in a location that is difficult to reach with the IR remote, the included IR Receiver
extension cable may be used to provide easier access.
BUTTON
REC
PRES
CONF
POWER
PRESET
VOLUME
SOURCE
WINDOW
FULLSCREEN
© Copyright 2021 Hall Technologies, LLC
FUNCTION
Start or stop recording to an attached USB storage device.
Blank or un-blank the PRESENT HDMI output.
Blank or un-blank the CONFIDENCE HDMI output.
Turn EMCEE200 on or off.
Switch between first four presets.
Adjust volume of AV or MIC inputs. Mute AV or last MIC adjusted.
Select a source to apply to a window.
Apply selected source to the selected window.
Switch between full-screen window layouts for simple 4:1 switching.
EMCEE200
31