Fisher & Paykel CLEANSMART 7 Series Installation Manual/User Manual page 35

Automatic recovery ON
Your washer will try to automatically correct the out of balance load. It will fill with water
and agitate to redistribute the load before trying to spin up again.
To change the out of balance (OOB) recovery routine:
1
2
End of cycle beeps
The beeps signalling the end of the cycle can be increased or decreased. The default
setting is 5 beeps.
To modify the number of beeps sounding at the end of the cycle:
1
CHANGING PRE-SET OPTIONS
Wash Temp
OOB Recovery
EOC Beeps
Factory Reset
Wash Temp
OOB Recovery
EOC Beeps
Factory Reset
Enter Option Adjustment mode, refer to the
Option Adjustment mode
'
Select the
HANDWASH
Touch to turn
MORE
AUTOMATIC RECOVERY
Enter Option Adjustment mode, refer to the
'Option Adjustment mode' for instructions.
Select the
SHEETS
for instructions.
'
cycle.
or .
cycle.
35