Fisher & Paykel CLEANSMART 7 Series Installation Manual/User Manual page 33

2
3
Controlled Cold
If your incoming cold water temperature is very low you will get a less effective wash. The
CONTROLLED COLD
raise the temperature of the wash to approximately 20°C.
To programme the Controlled Cold temperature option:
1
CHANGING PRE-SET OPTIONS
Wash Temp
OOB Recovery
EOC Beeps
Factory Reset
option solves this problem by adding a small amount of hot water to
Wash Temp
OOB Recovery
EOC Beeps
Factory Reset
Select the wash temperature you want to
adjust, eg , by touching the
WARM
button. The digital display screen
TEMP
shows the current setting.
Touch or
MORE
decrease to the desired temperature. Each
increment is equal to approximately 0.5°C.
Enter the Option Adjustment mode, refer
to the 'Option Adjustment mode' for
instructions.
Select the cycle.
HEAVY
WASH
to increase or
LESS
33