Integrated Drawer Front & Toe Kick Dimensions - Fisher & Paykel DishDrawer DD602 Installation Instructions Manual

SECTION 5
IMPORTANT
I
Recommended Drawer
N
Front thickness for
Integrated products is
T
/ " to / " (16mm to
5 3
8 4
18mm).
E
Recommended Toe Kick
thickness is / " (9mm).
3
8
G
R
IMPORTANT
A
Drawer Front material
must be suitable for
T
damp conditions or
adequately sealed to
E
withstand moisture.
Additional protection
D
can be provided by using
a “Moisture Resistant
Board”.
P
R
IMPORTANT
O
Allow for any
obstructions at the top of
D
the cavity when allowing
for space between the
countertop and
U
DishDrawer.
C
T
IMPORTANT
A / ” (6mm) gap must be
1
4
provided between top
O
and bottom Drawer Front
in the position shown.
N
L
Y
Page DD_15
All manuals and user guides at all-guides.com
INFORMATION FOR CABINET MAKER FOR
INTEGRATED DISHDRAWER
STEP 5.1 INTEGRATED DRAWER FRONT & TOE KICK
DIMENSIONS
5.1.1
Use the following diagrams to work out the dimensions for the Integrated Panels for Drawer
Fronts and Toe Kicks..