Adjusting The Feet; Fitting The Endplate To The Chassis (Optional) - Fisher & Paykel DishDrawer DD602 Installation Instructions Manual

STEP 3.3 ADJUSTING THE FEET
3.3.1
1
8
1
8
3.3.2
3.3.3
3.3.4
3.3.5
STEP 3.4 FITTING THE ENDPLATE TO THE CHASSIS (OPTIONAL)
3.4.1
All manuals and user guides at all-guides.com
IMPORTANT
The DishDrawer must be
levelled so that each
corner is at least within
/ ” (3mm) of level.
1
8
WARNING
The DishDrawer should
not support any part of
the kitchen cabinets.
IMPORTANT
Make sure the Inlet and
Drain Hoses are not
restricted or damaged.
TIP
Each turn of the foot
adjusts by / ” (1.25mm).
3
64
TIP
For ease when sliding the
feet back, place a little
soap on the Slide
Runners.
Page DD_10