FITTING THE DISHDRAWER
STEP 3.1 CONNECTING THE SERVICES
3.1.1
3.1.2
WATER SUPPLY.
3.1.3
If required, the Drain Hose may be
trimmed to a suitable length.
3.1.4
See Step 1.4 -
Electrical, Plumbing & Drainage
Information.)
3.1.5
3.1.6
3.1.7
see Step 1.4
All manuals and user guides at all-guides.com
HOT
SECTION 3
WARNING
Ensure the edges of the
Services Hole are smooth
or covered. (See Step 1.2 -
Product Specifications &
Cavity Dimensions.) If the
Services Hole is through a
metal partition, the hole
must be protected with the
Edge Protector provided.
WARNING
DO NOT adjust the
length of the Inlet Hose.
TIP
Turn the water valve ON
to check for any leaks,
before pushing the
DishDrawer back into its
cavity.
WARNING
Attach the Drain Hose
Support to the cabinet
joinery to prevent
siphoning and keep the
drain hoses from kinking.
Page DD_08