Inside Weather SARNO CHAIR Manual

Advertisement

Quick Links

SARNO CHAIR

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SARNO CHAIR and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Inside Weather SARNO CHAIR

  • Page 1 SARNO CHAIR...
  • Page 2 Gather Your Eggs... Legs Seat Back Back Brace Front Brace Side Braces Seat 10x Button Head Screw 2x Short Wood Screw Allen Key 8x Pocket Hole Screw Note: Please retain all boxes until you are certain that your product isn’t damaged and that you do not wish to return it.
  • Page 3 Step 1: Assemble the Legs Distinguish Leg A and Leg B from their notches. Leg B slots into Leg A (Leg A, notch faces up. Leg B, notch faces down). Facing the front of the chair, make sure the back of Leg A is on the left and Leg B is on the right.
  • Page 4 Step 2: Place the Seat Place the Seat down on the criss-crossed legs. Push the seat all the way back into the notches in the rear of the legs. Hand tighten the button head screws through the holes from the bottom. Do not fully tighten yet.
  • Page 5 Step 3: Attach the Back Align the holes in the Seat Back with the tops of the legs and cap it on. Use the short wood screws and tighten into the seat back until the screw is flush with the surface.
  • Page 6 Step 4: Add the Front and Rear Leg Braces Align the Front Leg Brace with the corresponding holes in the legs. Repeat with the rear brace. Step 5: Add the Side Leg Braces Now fit the side braces in place using the same steps as previously.
  • Page 7 Step 7: Add the Wood Screws Gently screw the pocket hole screws into the wood dowels. Step 8: Enjoy DONE!

Table of Contents