Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Aiper Orca 1200 Pro
Summary of Contents for Aiper Orca 1200 Pro
- Page 1 ROBOTIC POOL CLEANER User Manual Orca 1200 Pro...
- Page 3 Thank you for choosing Aiper robotic pool cleaner. You have joined millions of people to enjoy the convenience of robotic pool cleaning. This user manual helps you to keep your robot performing at its best. Please take a few moments to read through it.
-
Page 4: Table Of Contents
CONTENTS Important Precautions ----------------------------- 1. Introduction ------------------------------------- ---------------------------------------- 2. Structure 3. Specifications ----------------------------------- 4. Operations -------------------------------------- Attentions ------------------------------------------ 4.1 Control Panel and Indicator Instructions ------ 4.2 FiIter Cleaning --------------------------------- 4.3 Installation of Foam Floating Blocks ---------- 5. Trouble Shooting -------------------------------- 6. -
Page 5: Important Precautions
Important Precautions 1. Read the manual carefully, and use the cleaner according to the manual. We are not liable for any losses or injuries caused by improper use. 2. To avoid any accidents/damages, it is strongly recommended to fix the power supply unit 11.5ft (3.5m) away from the swimming pool by using the included safety rope. -
Page 6: Introduction
20. Do not allow children to ride on the cleaner or play with it. 1. Introduction The robotic pool cleaner Orca 1200 Pro is a new type of highly efficient and energy-saving swimming pool cleaning robot. Through its advanced computer-controlled program, it can clean the pool walls and floor automatically. -
Page 7: Specifications
3. Specifications 1. Model Orca 1200 Pro 2. Rated Input Voltage 110V~120V, 60Hz 3. Rated Working Voltage DC 28V 4. Power 150W 5. Optional Working Cycles 1H/2H/3H 6. Pool Size Up to 50ft (15m) 71GPM(267LPM) 7. Filter Capacity 180μm 8. Filter Density 9. - Page 8 2. When pulling the cleaner out of the water, suspend the cleaner on the water for about 10-15 seconds to empty the water inside. Please hold the top handle only; never pull the cable. 3. The power supply unit has to be placed in a proper position to reach the distal end of the pool, at least 11.5ft (3.5m) away from the pool edge.
-
Page 9: Control Panel And Indicator Instructions
4.1 Control Panel and Indicator Instructions Sign Instruction Function description Press this button, the cleaner is power-on. ON/OFF Power on/off Press a second time, the cleaner is off. The cleaner runs for 1 hour CYCLE The cleaner runs for 2 hours The cleaner runs for 3 hours Indicates the working cycle and fault warning 1H, 2H and 3H... -
Page 10: Fiiter Cleaning
Status Cause Suggestion Abnormal Indicator Indication 4.2 FiIter Cleaning A. Slide the two clips according to the indications on the top cover to open it and take out the filters. -
Page 11: Installation Of Foam Floating Blocks
B. Clean and wash the filter baskets. C. Re-install the filters, pay attention to the right position and slide the two clips to close the top cover. 4.3 Installation of Foam Floating Blocks Attention: If your robot is performing well, please ignore these instructions. -
Page 12: Trouble Shooting
5. Trouble Shooting Remark: The pool water condition must be within the following parameters: • PH: 7.0 —7.4 • Salt: Max 5,000 ppm • Temperature: 10°C(50°F) to 35°C(95°F) • Chlorine: Max 2 ppm Issues Possible Causes Solutions The cable is not fully Unplug the power cord released and fully release the cable... - Page 13 The pool filter system Turn off the pool filter The robot and pump are running system and pump does not reach all The cable is not long pool areas Release the cable enough in the pool The filter baskets need Clean and wash the filter The robot to be cleaned...
-
Page 14: Packing List
Safety Rope Floating Blocks 7. Warranty 1.This product is covered by Aiper warranty for 24 months ( only for driving kit and control box kit) from the date of purchase. Consum- able parts are beyond warranty including Belts/Filter baskets/Rollers/ Side covers. - Page 16 Aiper Customer Service: US Toll Free: 1-866-850-0666 Email: service@aiper.com Facebook: @AiperOfficial...
Need help?
Do you have a question about the Orca 1200 Pro and is the answer not in the manual?
Questions and answers
Need to replace control box, no power to cleaner