Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Rockwell RT7053
Summary of Contents for Rockwell RT7053
- Page 1 RT7053 13mm DRILL PRESS...
- Page 3 RT7053...
- Page 4 RT7053...
- Page 5 RT7053...
- Page 6 RT7053...
-
Page 7: Component List
13MM DRILL PRESS COMPONENT LIST Allen key Chuck key Up and down handles Bolts and washers Support column Safety guard Table Headstock/motor assembly Chuck Base plate Screws (SEE FIG E) Guard securing screw x 3 (SEE FIG F) Locking nut (SEE FIG H) Spindle alignment adjustment screw (SEE FIG H) Depth stop (SEE FIG I1) Table securing bolt (SEE FIG J) -
Page 8: Safety Instructions
13MM DRILL PRESS SAFETY INSTRUCTIONS 9. Use protective equipment Use safety glasses. WARNING! When using electric tools basic safety Use face or dust mask if working operations precautions should always be followed to reduce create dust. the risk of fire, electric shock and personal injury. 10. -
Page 9: Technical Data
The use of any accessory or attachment other than one recommended in this instruction manual may present a risk of personal injury. Type RT7053(RT, RS-designation of machinery, 22. Have your tool repaired by a qualified person representative of Pillar Drill) This electric tool complies with the relevant safety rules. - Page 10 13MM DRILL PRESS contents against check list. Retain packaging until Raise the table and place a piece of scrap wood on it. all parts are accounted for and assembly has been Locate the depth stop into the hole and hold it using completed.
-
Page 11: Maintenance
13MM DRILL PRESS secured following a speed change, the main switch may fail to operate. Check that the cover is fully closed and secured. Loosen the screw of the headstock/motor assembly and open the cover, then adjust the speed by moving the belt among different groves (See Fig. - Page 12 POSITEC AUSTRALIA PTY LTD ABN 14 101 682 357 MADE IN PRC...
Need help?
Do you have a question about the RT7053 and is the answer not in the manual?
Questions and answers