Fisher & Paykel CLEANSMART WL8O60P Installation Manual page 36

2
Factory reset
You can reset your washer to the default settings it left the factory with.
To reset your washer to its factory settings:
1
2
3
36
CHANGING PRE-SET OPTIONS
Wash Temp
OOB Recovery
EOC Beeps
Factory Reset
Touch the
MORE
increase or decrease the number of beeps, or
for no beeps to sound at the end of the cycle.
Enter Option Adjustment mode, refer to the
'Option Adjustment mode' for instructions.
Select the
EASY IRON
The display will show
for 3 seconds to reset your washer to its
factory settings.
This action will reset the washer to the
default settings, exit Option Adjustment
mode and restart the washer in normal
operating mode.
Touch to exit if you do not wish to reset
your washer. To save changes and exit from
the Option Adjustment mode at any time
(ie to return to normal operating mode),
touch .
or button to
LESS
cycle.
. Touch