Table of Contents
Advertisement
If you fill beyond the 'Max' mark, the fabric softener will dispense into the bowl prematurely
and may stain clothes, and also contribute to scrud (described below).
If you wish to use fabric softener we recommend:
Using it sparingly. Measure it carefully to ensure you do not fill above the 'Max' level
z
of the dispenser.
Using a fabric softener that is of a thinner consistency.
z
Clean the dispenser as soon as the cycle has finished.
z
Clean your washer regularly using the
z
for your washer'.
Cold water washing increases the chance of this build-up occurring. We recommend a
z
warm or hot wash at regular intervals, eg every 5th wash.
Cleaning the dispenser
The dispenser may need cleaning periodically, refer to 'Caring for your washer' for advice
about cleaning the dispenser.
Scrud
Scrud is the name of the waxy build-up that can occur within any washer when fabric
softener comes into contact with detergent. This build-up is not brought about by a fault
in the washer. If scrud is allowed to build up in the washer it can result in stains on clothes
and/or an unpleasant smell in your washer. Scrud can be kept under control by using the
cycle regularly, refer to 'Caring for your washer'.
BOWL CLEAN
WASH PREPARATION
Choosing the right cycle
If you wish to use fabric softener you will need
to select
button which will give you a deep rinse. If the
SOFTENER
softener will not be dispensed correctly.
A small volume of water remaining in the
dispenser at the end of the cycle is normal.
Adding the fabric softener
Always follow the manufacturer's
recommendations on the fabric softener
packaging for the correct dosage. Measure
the softener out into the cap and pour into
the fabric softener dispenser. The softener will
remain in the dispenser until the deep rinse
where water flushes it into the bowl.
BOWL CLEAN
by touching the
SOFTENER
option is not selected, the fabric
cycle, refer to 'Caring
OPTIONS
21
Advertisement
Table of Contents
