Expanding Signal Output Range - Eizo ColorEdge CG246 User Manual

●
To correct the screen position
Note
• Since the number of pixels and the pixel positions are fixed on the LCD monitor, only one position is provided to display
images correctly. The position adjustment is made to shift an image to the correct position.
Procedure
1. Choose "Analog Adjustment" from "Screen", and press
2. Choose "Hor. Position" or "Ver. Position" from "Analog Adjustment", and press
The "Hor.Position" or "Ver.Position" menu appears.
3. Adjust the position with
4. Press to exit.
5. Close Pattern 1.
5.
Adjusting color gradation.
●
To adjust color gradation automatically
Every color gradation (0 to 255) can be displayed by adjusting the signal output level.
Procedure
1. Display Pattern 2 in full screen on the monitor using the "Screen adjustment pattern files".
2. Choose "Screen" from the Adjustment menu, and press
3. Choose "Analog Adjustment" from "Screen", and press
4. Choose "Range Adjustment" from "Analog Adjustment", and press
The output range is set automatically.
5. Close Pattern 2.

2-5. Expanding Signal Output Range

The output range of the brightness is extended from 16 – 254 to 0 – 255 for display.
Procedure
1. Choose "Screen" from the Adjustment menu, and press
2. Choose "Range Extension" from "Screen", and press
3. Select "On", "Off", or "Auto" with
Attention
• When the DVI signal is input, "Auto" cannot be selected.
4. Press to exit.
26
Chapter2AdjustingScreens
or .
or .
.
.
.
.
.
.
.