Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Strictly Beds & Bunks Manuals
  4. Indoor Furnishing
  5. Memphis Bunk Bed
  6. Assembly instructions manual

Strictly Beds & Bunks Memphis Bunk Bed Assembly Instructions Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
Single Size Kit E
Double Size Kit D
Instructions: 6/MEMPHIS
(Version March 2021)
Memphis Bunk
Bed
Assembly Instructions
IMPORTANT – READ CAREFULLY –
RETAIN FOR FUTURE REFERENCE
(All Sizes)
CUSTOMER CARE
We have checked all parts to ensure they are free of damage. However timber is a natural, living product.
Occasionally timber can still be adjusting to humidity, for this reason a crack or stretch mark may appear after
the product has been packaged.
Strictly Beds and Bunks however have a FREE PARTS REQUEST
service in this unlikely event. You need to order a part please go to
Parts Portal - www.strictlyhelpdesk.co.uk.
Email Assistance: help@strictlybedsandbunks.co.uk
Using the Camera on your phone scan this barcode to
take you our after sales. You can find various options as
regards assistance on this purchase.
Mattress Selection Available
Strictly Beds has a full range of mattresses to fit this bunk bed.
This model has been designed to take a thicker 20cm mattress.
To go to our selection please type in
www.strictlbedsandbunks.co.uk/mattress
Using the Camera on your phone, scan this barcode to
take you to our mattress selection
IMPORTANT:
DO NOT DISPOSE
of
the packaging until you are satisfied
with your purchase.. Please keep all
cardboard until fully satisfied.

Advertisement

loading
Need help?

Need help?

Do you have a question about the Memphis Bunk Bed and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Strictly Beds & Bunks Memphis Bunk Bed

Summary of Contents for Strictly Beds & Bunks Memphis Bunk Bed

  • Page 1 Single Size Kit E Double Size Kit D Instructions: 6/MEMPHIS (Version March 2021) Memphis Bunk Assembly Instructions IMPORTANT – READ CAREFULLY – RETAIN FOR FUTURE REFERENCE (All Sizes) CUSTOMER CARE We have checked all parts to ensure they are free of damage. However timber is a natural, living product. Occasionally timber can still be adjusting to humidity, for this reason a crack or stretch mark may appear after the product has been packaged.

  • Page 2: Safety First

    Safety First ! The top surface of the mattress must not be above the line ,marked on the frame (Maximum height: 20cm). The size of the mattress required is detailed below: Standard 3ft Single, Standard Length - Mattress size 90cm by 190cm Small 3ft Single, Standard Length - Mattress size 75cm by 190cm Standard 2ft 6 Single, Short Length - Mattress size 90cm by 160cm Small 2ft 6 Single, Short Length - Mattress size 75cm by 160cm...
  • Page 4 TOP TIPS - TOP TIPS Read before you start assembly Locating the Dowel Rods To keep the bed from rattling all the dowel holes have been slightly mis-drilled by a couple of mm. When you push parts together the dowels will straighten and pull together to ensure a tight fit.
  • Page 5 How to identify your parts and fixings All our products have four attachment methods. These are colour coded, at the end of each part you will find a marker pen marking either RED, WHITE or BLUE (two types) RED MARKING/FIXINGS The part will have a red marker pen marking on the end.

  • Page 6: Parts Identifier

    Parts Identifier Part L Corner Posts - LEFT E10 - End guard rail - 3ft (RED) Part R - Corner Posts - RIGHT E09 - End guard rail - 3ft (WHITE) Part 1- Side Rail Part 13- Blue Headboard Part 2- Top Long Back Guard Rail Part 14- White Headboard Part 3- Bottom Long Back Guard Rail Part 15- Red Headboard...
  • Page 7 Step One: Build non ladder headboard WHITE BLUE We need to build the two headboards at either end of the bunk bed. You will find four corner posts, On the BOTTOM of the post they will be marked with an end letter L - Left or R-Right. Select one left (L) and one right (R) and lay as so face down on the carpet as shown above.
  • Page 8 Attach the Side rails to the headboards With the help of a second person stand both the headboards up. The white CHALK MARKINGS but be facing inwards ready to attach the guard and side rails. PIC1 Now we need to attach the back and front guard rails and siderail, these go at the very top.
  • Page 9 Now we Build the Ladder You will have two ladder struts, these need to be connected to the ladder. When installed the ladder rungs need to be tight. The holes on the ladder struts have been mis- drilled by 2mm to ensure a tight fitting. Locate each ladder to the holes on the struts.
  • Page 10 Fixing The ladder to the bed First we need to attach the two ladder hooks. Lean the ladder up against the bunk bed ensure it is resting on the floor. The top of the ladder has the largest gap, ensure the lowest ladder rung is at the bottom.
  • Page 11 Attaching The Centre Rails SINGLE BUNK BEDS - One Centre Rail From the inside of the bed we need to attach metal brackets, one either end. These are fixed using the small screws (L), these are fixed to part 13 (blue) - third insert down from the top.
  • Page 12 Now we attach guard rail supports These two rails prevent the guard rails from being forced apart, very important. Using a tape measure find the centre of the back guard rail and centre of the front guard rail. Make a small pencil mark.