Advertisement
Advertisement
Table of Contents
Related Manuals for Strictly Beds & Bunks Canopy Bed Single
Summary of Contents for Strictly Beds & Bunks Canopy Bed Single
- Page 1 Instructions 31 Fixings Q Canopy Bed Single Assembly Instructions...
- Page 2 Enby Canopy 3ft Single- LONG Description Required Part CL - Left Handside Corner Post Part CR - Right Handside Corner Post Part 1- Long Side rail Part CHR - Canopy High Rail Part 4K- Quattro/Enby side top siderail facia Part BS - Pack of 3ft base slats Part 13- 3ft Blue Headboard Facia Part RSA - Right handside Arch Part LSA - Left handside Arch...
- Page 3 TOP TIPS - TOP TIPS Read before you start assembly Locating the Dowel Rods To keep the bed from rattling all the dowel holes have been slightly mis-drilled by a couple of mm. When you push parts together the dowels will straighten and pull together to ensure a tight fit.
- Page 4 How to identify your parts and fixings All our products have four attachment methods. These are colour coded, at the end of each part you will find a marker pen marking either RED, WHITE or BLUE (two types) RED MARKING/FIXINGS The part will have a red marker pen marking on the end.
- Page 5 Fixings List To ALL customers - If you have a missing or damaged bolt you can order these FREE of CHARGE using the following method, please note we will require your order number or delivery address Email: help@strictlybedsandbunks.co.uk Website: www.strictlyhelpdesk.co.uk All fixings are sent out via next day Royal Mail Post...
- Page 6 Assemble The Headboard LSA RSA White Chalk Markings facing upwards Lets build the headboard Start by place part CL to your left, CR to your right. You must ensure the white chalk makings are facing upwards. The locate the part 13 to the bottom. Using Bolts A and D attach the blue bottom facia.
- Page 7 Attach base slats You will have twelve extra wide base slats. Push the first slat tight with the footboard corner posts, then using the base slat spacer block evenly space out the remaining base slats. DO NOT SCREW IN PLACE YET. Now push the slats flush to the left hand side rail and screw in (do not screw the right hand side yet).
Need help?
Do you have a question about the Canopy Bed Single and is the answer not in the manual?
Questions and answers