Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Strictly Beds & Bunks Manuals
  4. Indoor Furnishing
  5. Moon Bunk Bed
  6. Assembly instructions manual

Strictly Beds & Bunks Moon Bunk Bed Assembly Instructions Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
Moon Bunk Bed
Assembly
Instructions
CUSTOMER CARE
We have checked all parts to ensure they are free of damage. However timber is a natural, living product.
Occasionally timber can still be adjusting to humidity, for this reason a crack or stretch mark may appear after
Strictly Beds and Bunks however have a FREE PARTS REQUEST
service in this unlikely event. You need to order a part please go to
Email Assistance: help@strictlybedsandbunks.co.uk
Using the Camera on your phone scan this barcode
Mattress Selection Available
Strictly Beds has a full range of mattresses to fit this bunk bed.
This model has been designed to take a thicker 20cm mattress.
Using the Camera on your phone scan this barcode
IMPORTANT:
the packaging until you are satisfied
with your purchase.. Please keep all
cardboard until fully satisfied.
the product has been packaged.
Parts Portal - www.strictlyhelpdesk.co.uk.
to take you our after sales. You can find various
options as regards assistance on this purchase.
To go to our selection please type in
www.strictlbedsandbunks.co.uk/mattress
to take you our mattress selection
DO NOT DISPOSE
Single Size Kit R
Double Size Kit S
Instructions: 41/MOON
(version March2021)
Assembly Instructions
IMPORTANT – READ CAREFULLY –
RETAIN FOR FUTURE REFERENCE
of

Advertisement

loading
Need help?

Need help?

Do you have a question about the Moon Bunk Bed and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Strictly Beds & Bunks Moon Bunk Bed

Summary of Contents for Strictly Beds & Bunks Moon Bunk Bed

  • Page 1 Single Size Kit R Double Size Kit S Instructions: 41/MOON Moon Bunk Bed (version March2021) Assembly Assembly Instructions IMPORTANT – READ CAREFULLY – Instructions RETAIN FOR FUTURE REFERENCE CUSTOMER CARE We have checked all parts to ensure they are free of damage. However timber is a natural, living product.

  • Page 2: Safety First

    Safety First ! The top surface of the mattress must not be above the line ,marked on the frame (Maximum height: 20cm). The size of the mattress required is detailed below: Standard 3ft Single, Standard Length - Mattress size 90cm by 190cm Small 3ft Single, Standard Length - Mattress size 75cm by 190cm Standard 2ft 6 Single, Short Length - Mattress size 90cm by 160cm Small 2ft 6 Single, Short Length - Mattress size 75cm by 160cm...
  • Page 4 TOP TIPS - TOP TIPS Read before you start assembly Locating the Dowel Rods To keep the bed from rattling all the dowel holes have been slightly mis-drilled by a couple of mm. When you push parts together the dowels will straighten and pull together to ensure a tight fit.
  • Page 5 How to identify your parts and fixings All our products have four attachment methods. These are colour coded, at the end of each part you will find a marker pen marking either RED, WHITE or BLUE (two types) RED MARKING/FIXINGS The part will have a red marker pen marking on the end.

  • Page 6: Parts Identifier

    Parts Identifier Part L Corner Posts - LEFT E10 - End guard rail - 3ft (RED) Part R - Corner Posts - RIGHT E09 - End guard rail - 3ft (WHITE) Part 1- Side Rail Part 13- Blue Headboard Part 2- Top Long Back Guard Rail Part 14- White Headboard Part 3- Bottom Long Back Guard Rail Part 15- Red Headboard...

  • Page 7: End View

    Section : Build non ladder headboard End View Top View We need to build the two headboards at either end of the bunk bed. You will find four corner posts, On the BOTTOM of the post they will be marked with an end letter L - Left or R-Right. Select one left (L) and one right (R) and lay as so face down on the carpet as shown above.
  • Page 8 We now need to attach the two rear side rails These are universal. See image on left - Side rails are third and fourth down. Locate the first side rail to the third set of holes from the top. Using fixings A, B &...
  • Page 9 Now we Build the Ladder You will have two ladder struts, these need to be connected to the ladder. When installed the ladder rungs need to be tight. The holes on the ladder struts have been mis- drilled by 2mm to ensure a tight fitting. Locate each ladder to the holes on the struts.
  • Page 10 Fixing The ladder to the bed First we need to attach the ladder hooks. Lean the ladder up against the bunk bed ensure it is resting on the floor. The top of the ladder has the largest gap, ensure the lowest ladder rung is at the bottom.
  • Page 11 Attaching The Centre Rails SINGLE BUNK BEDS - Two Centre Rails Each bunk have a centre rail. From the inside of the bed we need to attach metal brackets, one either end. These are fixed using the small screws (L), these are fixed to part 13 (blue) - third insert down from the top.
  • Page 12 Now we attach guard rail supports These two rails prevent the guard rails from being forced apart, very important. Using a tape measure find the centre of the back guard rail and centre of the front guard rail. Make a small pencil mark.