Strictly Beds & Bunks Molly Assembly Instructions Manual

Box: H
Instructions: 32
(Version November 2020)
Molly Single
Assembly Instructions
PANEL
IMPORTANT – READ CAREFULLY –
RETAIN FOR FUTURE REFERENCE
Cabin Bed
Safety First !
The top surface of the mattress must not be above the line ,marked on the frame (Maximum height:
20cm). The size of the mattress required is detailed below:
Standard Single, Standard Length - Mattress size 90cm by 190cm
Small Single, Standard Length - Mattress size 75cm by 190cm
Standard Single, Short Length - Mattress size 90cm by 160cm
Small Single, Short Length - Mattress size 75cm by 160cm
High beds and the upper bed of a bunk bed are not suitable for children under six years due to risk of
injury from falls.
Be aware of the danger of young children (under 6) falling from upper bunk.
Beds should not be used if any structural part is broken or missing.
Bunk beds and high beds can present a serious risk of injury from strangulation if not use correctly.
Never attach or hang items to any part of the bunk bed that are not designed to be used with the bed,
for example, but not limited to ropes, strings, cords, hooks, belts and bags.
Children can become trapped between the bed and the wall, a roof pitch, the ceiling, adjoining pieces
of furniture (eg cupboards) and the like. To avoid risk of serious injury the distance between the top
safety barrier and the adjoining structure shall not exceed 75mm or shall be more than 230mm.
Always ensure that guardrails, ladder and other components are maintained in the proper position and
free from damage, and all the screw fixings tight.
Always use the ladder for entering and leaving the upper bunk.
Do not allow horseplay on or under the bed and prohibit jumping on the bed.
Use a nightlight as an added safety precaution for persons under the upper bunk.
Use guardrails on both sides of the upper bunk.
Every bedroom mush have at least one opening window. Ventilation of the room is necessary in order
to keep the humidity low and to prevent mould in and around the bed.
The bed complies with BS EN 747-1: 2012+A1 :2015 safety standards
IMPORTANT: DO NOT DISPOSE of the packaging until you are
satisfied with your purchase. . Please keep all cardboard until fully
assembled.