Advertisement
SE600.1DF / SE1000.1DF / SE2000.1DF / SE3000.1DF
RCA signal input/output
RCA signal input
High pass filter (HPF)
Low pass filter (LPF)
Gain
Input sensitivity (LEVEL)
Frequency
Subwoofer remote volume control input
Power status, Clipping & Protection LED
Speaker wire terminal
Connect RCA signal cable from audio source (input) or
connect another mono amplifier (output).
Connect RCA signal cable from audio source
Adjust the High pass filter's crossover point. 15Hz - 80Hz for
1000.1DF, 2000.1DF & 3000.1DF. 15Hz - 1KHz for 600.1DF.
Adjust the Low pass filter's crossover point (80Hz - 20KHz)
Adjust the Gain level (0,2-6V)
Adjust the input sensitivity (0-12 dB)
Adjust the Bass Boost's center frequency (35Hz - 70Hz)
Input for connection of the bass remote control
Indicating the power & clipping status and activated protecion mode
Connect to one or more speakers
Advertisement
