WORKMASTER GO-A8-PW Operator's Manual page 24

8. If the Car Gate will not move, STOP using the GO-A8-PW Opener and notify
your supervisor.
9. Once the car gate is fully closed pull the Pivot Locking Pin from the Pivot Lock
Pin hole and push/pull the Pivot Pull Switch to the Straight position. This will
cause the Wheels to rotate perpendicular to the Railcar.
10. Secure the Pivot Locking Pin in the Straight lock pin hole.
11. Roll the GO-A8-PW Opener back from the Railcar thereby disengaging the
CAPSTAN DRIVE FITTING from the Railcar's Capstan Socket.
12. Engage the Railcar Gate locking mechanism.
Do not use other opening devices (pry bars,
multipliers, etc.) in an attempt to "Help" the
GO-A8-PW Opener.
PH: 866.476.9217 19