Call Channel Programming - Icom IC-M1V Instruction Manual

Call channel programming

The call channel key is used to select channel 9, however,
you can program your most often-used channels in each
channel group for quick recall.
q Push [CH/WX•U/I/C] for 2 sec. sev-
eral times to select the desired
channel group (USA, INT, CAN) to
be programmed.
w Push [16•9] for 2 sec. to select the
call channel of the selected chan-
nel group.
• "CALL" and call channel number ap-
pear.
e Push [16•9] again for 5 sec. (until
long beep changes to 2 short
beeps) to enter call channel pro-
gramming condition.
• Call channel number and channel
group to be programmed flashes.
r Push [Y]/[Z] to select the desired
channel.
TAG
USA
t Push [16•9] to program the dis-
played channel as the call channel.
• The call channel number and channel
group stop flashing.
TAG CALL
USA
TAG TAG CALL
USA USA
4
BASIC OPERATION
TAG CALL
USA
TAG TAG CALL
USA USA
11