Channel Comment Programming; About The Channel Comment - Icom IC-M1V Instruction Manual

About the channel comment

The IC-M1V has a capability to assign up to 10-character
channel comments for each operating channel, including the
weather channel. This provides easy recognition of channel
usage, or station names, etc.
When shipped from the factory, the IC-M1V is programmed
with default comments for each VHF marine channel. These
defaults can be overwritten if desired.
× Available characters
(=) (+) (–) ( ) (/)
*
(3) (4) (5) (6) (7)
(D) (E) (F) (G) (H)
(N) (O) (P) (Q) (R)
(X) (Y) (Z) (a) (b)
(h) (i) (j) (k) (l)
(r) (s) (t) (u) (v)

CHANNEL COMMENT PROGRAMMING

(,) (space) (0) (1) (2)
(8) (9) (A) (B) (C)
(I) (J) (K) (L) (M)
(S) (T) (U) (V) (W)
(c) (d) (e) (f) (g)
(m) (n) (o) (p) (q)
(w) (x) (y) (z)
Channel comment programming
q Push [Y]/[Z] to select a channel to
program.
• Push [CH/WX•U/I/C] for 2 sec. to select
a channel group, if necessary.
w While pushing [MONI], push [DW].
• The 1st character of the currently pro-
grammed comment flashes.
e Push [Y]/[Z] to select a character.
r Push [SCN] to move to the right; then
push [Y]/[Z] to select a character.
• Pushing [H/L], moves to left
t Continue until the desired characters
have been selected, then push [DW]
to return to normal operation.
7
INT
INT
INT
INT
INT
15