Fisher & Paykel DW60U2I1 User Manual page 32

PROBLEM
Water marks
left on
glasses and
cutlery.
Hard water
28
TROUBLESHOOTING
POSSIBLE CAUSE
Rinse aid level or dosage
setting is too low.
WHAT TO DO
Ensure there is rinse aid in dispenser. If
necessary, increase the rinse aid setting or
try using a wash programme with a higher
temperature. See sections 'Using rinse aid'
and 'Wash programme data'.
Increase the rinse aid setting and the
amount of detergent. See section 'Water
hardness and dishwashing'.
If living in an area with very hard
water, consult a plumber on installing a
household water softener.