The DishDrawer®s are tested to EN50242 standards for both wash and dry performance.
The following are loading pattern diagrams, detergent quantities and rinse aid quantities used
for the DishDrawer®.
Wash Programme
Detergent Quantities
Rinse Aid Setting
Water Softener setting
Maximum Place Setting (per
DishDrawer)
Accessories to be used in the
Dishwasher Standards Test
Recommended Loading Pattern
To install the cup support assembly
Note: the front cup support assembly is
longer than the rear.
Dishwasher standards test
Normal Eco
2.5g (pre wash)
15.5g (main wash)
4
Adjust the water softener to match the water
hardness. Refer to the water softener and option
adjustment mode section of the User Guide.
6
Basket, drain filter access panel, mega rack, plate
insert, cutlery basket, cup racks and cup support
assembly.
8 1 5
5 1 8
5 1 3
3 1 5
3 1 5
5 1 3
3 2 2 4
4 2 2 3
7 2 4 4
4 4 2 6
Loading particulars for the cups
1 2
3
4 5 6
7 8
13