Trouble Shooting - Fisher & Paykel DE7060P1 Service Manual

PROBLEM POSSIBLE CAUSES
Dryer is Drying cycle selected
taking too
not appropriate for the
long/ results load.
were not
Dryness level selected
satisfactory.
not appropriate for the
load.
Selected drying temp,
not appropriate for the
load.
Dryer overloaded for
the cycle.
Lint filter is blocked.
Load overly wet at the
start of cycle.
Clothes
Cycle selected not
getting appropriate for the load.
too hot or
damaged.
Items removed from
dryer before the end
of cycle cool down had
finished.
27

11 TROUBLE SHOOTING

WHAT TO DO
Select an appropriate cycle
for the load.
Select a higher dryness level.
Select a higher drying temp.
Some cycles have a lower
max. load size. Refer to
pages 22 and 23 of the Use
and Care manual.
Try dividing the load in half
and dry half at a time.
Clean the lint filter.
Remove more water from
the load before placing it in
the dryer, eg select a faster
spin on your washer, a speed
appropriate for your load.
Ensure the cycle selected is
appropriate for items in the
load.
Removing items before cool
down may damage clothing
if it is not spread out and
exposed to cooler air once
removed from the dryer.