Drive Chain Lubrication; Cable Inspection And Lubrication - Yamaha XT250M 1999 Owner's Manual

Drive chain lubrication

The chain consists of many parts
which work with each other. If the
chain is not maintained properly, it
will wear out quickly. Therefore,
the chain must be serviced regular-
ly. This service is especially neces-
sary when riding in dusty areas.
This motorcycle is equipped with a
sealed type chain. Steam cleaning,
high-pressure washers, and sol-
vents can damage the drive chain,
so do not use these for cleaning it.
Use only kerosene to clean the
drive chain. Wipe it dry, and thor-
oughly lubricate it with SAE 30 ~
50W motor oil. Do not use any
other lubricants on the drive chain.
They may contain solvents that
could damage the sealed chain.
PERIODIC MAINTENANCE AND MINOR REPAIR
EAU03006
cC
Be sure to oil the chain after wash-
ing the motorcycle or riding in the
rain.
EC000097
Cable inspection and
lubrication
w
Damage to the outer housing of
cables may lead to internal rusting
and interfere with the cable move-
ment. Replace damaged cables as
soon as possible to prevent unsafe
conditions.
Lubricate the cables and cable
ends. If a cable does not operate
smoothly, ask a Yamaha dealer to
replace it.
6-24
Recommended lubricant:
Engine oil
EAU02962
EW000112
1
2
3
4
5
6
7
8
9