ITEM
Brake and shift pedal
Brake and clutch lever pivot
Sidestand pivot
Chassis fasteners
Fuel tank
Lights, signals and switches
NOTE:
Pre-operation checks should be made each time the motorcycle is used. Such an inspection can be thoroughly
accomplished in a very short time; and the added safety it assures is more than worth the time involved.
w
If any item in the PRE-OPERATION CHECKS is not working properly, have it inspected and repaired before oper-
ating the motorcycle.
9 Check for smooth operation.
9 Lubricate if necessary.
9 Check for smooth operation.
9 Lubricate if necessary.
9 Check for smooth operation.
9 Lubricate if necessary.
9 Make sure that all nuts, bolts and screws are properly tightened.
9 Tighten if necessary.
9 Check fuel level.
9 Fill with fuel if necessary.
9 Check for proper operation.
PRE-OPERATION CHECKS
ROUTINE
4-2
PAGE
6-25
1
6-25
6-26
2
—
3
3-5~3-6
3-2~3-4, 6-29~6-32
4
5
6
7
8
9