07/02/03
ELECTRICAL
CONNECTIONS
Electrical power connections are made at the left hand end of the case, behind the removable
front or rear base panels.
REMOTE MODELS
All electrical connections for remote models will be made in the junction box located behind the
removable front base panel, at the left hand end of the case.
SELF CONTAINED MODELS
All electrical connections for self-contained models will be made in the control panel of the
case. All electrical connections have been terminated inside the control panel and "pig-tailed"
for ease of connecting field wiring. See appropriate wiring diagram in this section.
CAUTION:
NOTE:
ALL WIRING AND CONNECTIONS MUST COMPLY
WITH N.E.C., STATE, PROVINCIAL AND LOCAL CODES.
HUSSMANN - GLOVERSVILLE
SECTION 5
THE FIXTURE MUST BE ELECTRICALLY GROUNDED.
Page 12