Table of Contents
Advertisement
4
SECTION 2
INSTALLATION
SHIPPING DAMAGE
All equipment should be examined for shipping damage before and during unloading. If there is
any damage, the carrier should be notified immediately and an inspection requested. The
delivery receipt must be noted that equipment was received damaged. If damage is of a
concealed nature, we suggest the carrier be contacted immediately, or no later than (3) days
following delivery. The consignee for all damages must file a claim with the carrier.
SHIPPING BRACES
Move the fixture as close as possible to its permanent location then remove all packaging and
shipping braces. Remove all separately packed accessories such as kits, shelves, etc.
EXTERIOR LOADING
These cases are not structurally designed to support excessive external loading such as the
weight of a person, therefore, do not walk on the top of these refrigerators or damage to the
refrigerator and serious personal injury could occur.
LOCATION
These refrigerators, like other open refrigerators, are sensitive to air disturbances. Air currents
passing around them will seriously impair their operation. Do not allow air-conditioning,
electric fans, open doors or windows, etc. to create air currents around these cases.
DO NOT INSTALL THE VENTED PANELS OF THE SELF-CONTAINED MODELS
AGAINST A WALL OR OTHER STORE FIXTURE.
Located in the lower front and rear of the self-contained models are vented panels. These panels
allow air circulation to the condensing unit. Blocking or restricting air circulation through these
panels can cause poor performance and damage the refrigeration system.
INSTALL THE REFRIGERATOR NO CLOSER THAN (4) FOUR INCHES FROM A WALL OR OTHER
STORE FIXTURES.
HUSSMANN - GLOVERSVILLE
Hide quick links:
Advertisement
Table of Contents
