3DLab GANG PRINT BEAT MACCHI MC.200 User Manual page 15

member of Group
MACHINE GUN & ELECTRIC MOTOR HOLDER INSTALATION
Machine gun installation: Glue machine guns (-39) into fuselage part (-1)
Electric motor holder installation: Fit the electric motor holder (-40) into the fuselage so that the Print
Beat logo is horizontal from front view
On the holder are marks which are showing how deep is necessary to insert the holder into the fuselage
to fot the recommended electric motor size 4240. In case you use another electric motor you must adjut
everything as per the size of by you selected motor.
Now the Macchi fuselage is ready for installation of the motor and speed controller which you fix to the
upper part of the holder (-40) by use the cable ties to the prepared holes.
14