3DLab GANG PRINT BEAT MACCHI MC.200 User Manual page 12

FIN & RUDDER
Rudder: Glue the rudder parts together (-20&-21).
Attach the movable part of the rudder (20) to the hexagonal axle (25) , fix by 1mm wire .
Tail wheel: Using the M2X25 mm screw, attach the tailwheel fork (28) to the hexagonal pin (24) – in this way is
possible to replace the part if needed.
Then mount the tyre (-30) onto the wheel disc and fix by the screw M3X 25mm to the fork (-28)
-
11
member of Group
-